24-hour hotline+86 17398956111

How to maintain the overflow ball mill?

TIMES:2021-07-09    

As a ball mill for non-mandatory ore discharge, the overflow ball mill has fine grinding particle size and is the most widely used fine-grained grinding ball mill in the processing plant. The output of the factory has a greater impact:

6.png

1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. Main oiling places (1) rotating bearings, (2) roller bearings, (3) all gears, (4) movable bearings, sliding planes.

2. The newly installed tires are prone to loosening and must be checked frequently.

3. Pay attention to whether the work of each part of the machine is normal.

4. Pay attention to check the wear degree of the wear-resistant parts, and pay attention to replace the worn parts at any time.

5. On the bottom frame plane of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents.

6. If the bearing oil temperature rises, stop immediately to check the cause and eliminate it.

7. If there is an impact sound when the rotating gear is running, stop it immediately to check and eliminate it.

Submit demand and obtain quotation